Twisted Ribbed Globe Lamp

A twisted ribbed mushroom table lamp with an organic modern feel — sculptural sphere shade on a narrow stem and solid circular base. Diffusing light softly through the walls and casting warm shadow patterns around the room. A cozy ambient table lamp, inspired by Japandi and Organic Modern style with a blooming bud aesthetic.

Easy and fast print in PLA, no supports needed — the shade is fully optimized for vase mode. Shade and base assemble together without glue or screws.

DIMENSIONS
• Shade: height: 180 mm (7 in), width: 207 mm (8.1 in)
• Base: height: 85 mm (3.3 in), width: 150 mm (5.9 in)

WEIGHT
Depends on printing settings. Using the recommended settings: shade ~90 g, base ~110 g. 

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~2h 25m
• Base: ~3h

FEATURES
• Print-ready and tested.
• Fits standard E26/E27 socket.
• Mix and match filament colors for the shade and base for a personalized look.
• Designed as a standard size and can be used as a replacement shade for most home table or pendant lamps (please check the measurements to ensure it fits your specific lamp).
• All lampshades and bases are part of my modular system (they are compatible with each other shades and bases from my profile and can be combined in any configuration).

WHAT'S INCLUDED:
Files for Lamp Shade and Base:
• STL — 3 files (Shade + Base part 1 + Base part 2), print-ready (tested and verified on Ender 3 S1)
• OBJ — full lamp assembly (shade + base combined), for import into Blender, Cinema 4D, or any 3D software
• 3MF — 3 files (Shade + Base part 1 + Base part 2), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).

Use LED bulb ONLY.

A lamp cord with E26/E27 socket is required (not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

•• For personal use ONLY. Resale of files or printed objects is not permitted.••


PRINT SETTINGS (recommended):
• Shade: VASE MODE, layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin (Warning! Do not apply fuzzy skin to the threaded parts of the base. You can also print the entire base without fuzzy skin).
• No supports needed.
• All STL, 3MF files are already oriented properly (base should be printed upside-down).