DJI Osmo Action 4

This case was designed to store all DJI Osmo Action 4 accessories in one place. The interior insert is printed in TPU, which prevents rattling and protects the camera from impacts inside the case. The interior has dedicated slots for the camera, the battery, and the magnetic mounting bracket, so everything stays organized and protected.

🎨 Filament: The case body is printed in PLA Marble White (13103), the logo and latches in PLA Basic Black (10101) and the interior insert in Varioshore TPU Blue. Any other TPU with a hardness of approximately 92A–95A should work as well.

🔩 Hardware: 6× M3×30 screws are required for assembly.
 

🔧 Remixes used: 
The camera insert is based on a design by AKA_Ordep
The case itself is based on the Rugged Box (Parametric) by Whity – highly recommended if you want to customize the dimensions