Paper Block Desk Organizer — Sticky-Note Tray + Pen/Scissor Column + Slot

A monolithic desk organizer that handles three things at once:

• Left zone — thin vertical slot, open on top + front + back. Drop

•   in a phone, a slim notebook, a stack of business cards, a menu card.

• - Middle zone — paper-pad well sized for a 90 × 90 mm sticky-note

•   cube. Tall back wall keeps the pad upright; sides slope from the

•   back down to a low front lip; the front lip is split in the middle

•   so your thumbs reach in to grab a sheet from the front.

• - Right zone — solid column with deep round holes for pens / pencils

•   / markers and one elongated slot for scissors (tips down). The front

•   face has a pencil icon inlay; the right face has a scissors icon

•   inlay — both two-color drop-in inserts.

Three STL files for two-color AMS printing:

• paper_block_organizer_body.stl— main body, drilled holes + icon

•   recesses (filament A — blue in the photos)

• - paper_block_organizer_pencil_inlay.stl— pencil silhouette that

•   drops flush into the front face (filament B — black in the photos)

• - paper_block_organizer_scissors_inlay.stl— scissor silhouette

•   that drops flush into the right face (filament B)

Assembly in Bambu Studio:

1. Import all three STLs as a single combined object (concatenate them

2.    into one ASCII STL or use Import → right-click → "Split to Parts"

3.    on the bundled file). Coordinates are already locked — the inlays

4.    land precisely in their recesses.

5. 2. Assign filament 1 (body color) to the body, filament 2 (icon color)

6.    to both inlays.

7. 3. Print flat on the bed, all wells facing up. No supports — every

8.    overhang is < 45°.

Single-color printing works too — just print the body alone. The icon

recesses read as engravings without inlay fill.

Prints flat on the bed, ~90 × 230 × 75 mm, ~5 h on a Bambu P2S in

PLA at 0.2 mm.