Bubble Dot Boho Table Lamp with Faceted Diamond Base

A bubble dot 3D printed lampshade with a soft, rounded texture that diffuses light into a warm ambient glow, printed in support-free vase mode for a seamless finish. The shade sits on a compact faceted base with flat geometric faces. Together they make a two-part table lamp that's easy to print, easy to assemble without glue or screws, and fits naturally in a boho, modern minimalist or japandi interior. Inspired by organic-geometric style. Mix and match filament colors or pair with other bases and shades from the modular system for endless combinations.

Download, print, mix with other bases and shades from my profile. New designs added regularly — follow so you don't miss them.

DIMENSIONS
• Shade: height: 170 mm (6.7 in), width: 163 mm (6.4 in)
• Base: height: 75 mm (3 in), width: 100 mm (3.9 in)

WEIGHT
Depends on printing settings. Using the recommended settings: shade ~80 g, base ~90 g. 

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~2h 20m
• Base: ~2h 45m

FEATURES
• Print-ready and tested.
• Fits standard E26/E27 socket (socket hole diameter: 41mm).
• Mix and match filament colors for the shade and base for a personalized look.
• Designed as a standard size and can be used as a replacement shade for most home table or pendant lamps (please check the measurements to ensure it fits your specific lamp).
• All lampshades and bases are part of my modular system (they are compatible with each other shades and bases from my profile and can be combined in any configuration).

WHAT'S INCLUDED:
Files for Lamp Shade and Base:
• STL — 2 files (Shade + Base), print-ready (tested and verified on Ender 3 S1)
• 3MF — 2 files (Shade + Base), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).

Use LED bulb ONLY.
A lamp cord with E26/E27 socket is required (not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW )

•• For personal use ONLY. Resale of files or printed objects is not permitted.••


PRINT SETTINGS (recommended):
• Shade: VASE MODE (spiralize outer contour), layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin.
• No supports needed.
• All STL, 3MF files are already oriented properly (base should be printed upside-down).