Holder for Kenwood Chef Attachments– Universal Fit

This is a universal storage holder for Kenwood mixer attachments, designed to work with both older (spring-ring) and newer (bayonet-style) systems.

 Instead of copying the original locking mechanism, this design uses a flexible friction clamp around the shaft. This makes it easy to print, tolerant to small dimensional differences, and compatible across multiple Kenwood generations.

Key features:

• Works with old and new Kenwood attachments

• Easy insert - push in, twist to release

• No supports required

• Optimized for FDM printing

• Compact and clean design for kitchen storage

How it works:
The holder uses three flexible arms to clamp the shaft. A small ramp near the top reduces the removal force when you twist the tool, making it much easier to take out compared to a pure friction fit.

Printing recommendations:

• PLA: works well, slightly stiffer feel

• PETG: more forgiving and smoother insertion

If the fit is too tight or too loose:

• Adjust scale slightly in the slicer, <1% should be enough

• Different printers and materials may require small tuning

Tested with older Kenwood tools.
Due to the flexible clamp design, it is expected to also work with newer models – feedback is welcome!

If you like this design, feel free to leave a like or share your make. Improvements and remix ideas are always appreciated.