May 8, 2026
Description
This version was created to be used with my Mini Figure Display Tower for the Prusa spool up-cycle contest. I provided all the tower components in case you want to make the tower or use them for remixes. It is 100mm or just under 4 inches in diameter. As of 4/30/26 I have added a new "Nut" (red) that is simplified and designed to be used as a stand alone with the Prusa spool to create a 1 level Lazy Susan.
Most of the modifications where centered around my tower design however I did need to add some mass to a few features after scaling it down so much. The assembly would not stay together because they did not "snap" together strongly enough but that is fixed and they snap together nice now.
My example .gif shows the tower spinning freely even though I forgot to add grease!
If you like my remix, please hit the heart button and download the models. I would love to see what you do with them so please share your makes and remixes!
*You will need 38 total cylinders. (4x of the cylinder bundles will provide extras)
4/30/26 - Added "Prusa Spool Lazy Susan Nut v1.0" to be used by itself to secure a Prusa spool or any other similar object. (Red center part)
Printed in PLA
.15mm layer
.4mm nozzle
No supports
OP did a great job designing this very useful tool!
Disclaimer:
My links may take you to Amazon for products I endorse and use on a regular basis.
JD3D is not responsible for any damage or harm caused by improper production, assembly and use.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
JD3D
