stand for wolfcraft hole saw AH45-130

The wolfcraft hole saw AH45-130 is a nice thing, but difficult to store in the workshop. It will scratch surfaces, catch fabrics or fingers. Of course you can disassemble it and store it in drawer, but this is to much inconvenience.

This thingy solve this problem. Additionally you can store needed allen keys in the stand. 

Print instructions

• PLA is sufficent

• I used 0.6mm nozzle 

• I used 5% cubic support infill to save material. this value depends on you material and printer capabilities

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.