Twist-fit Lamp Shade (E27 and GU10 lamp fixtures)(works with most IKEA lamp cords)

A clean, minimalist lighting solution designed for rental apartments and easy swaps. This is a non-destructive system that fits standard 50mm bulb holders (standard for E27 pendant cords and fixtures found in EU).

How it works

1. The Clamp (Male): A friction-fit ring that slips over your bulb holder. It features a split-ring design—simply tighten one bolt to lock it firmly in place.

2. The Shroud (Female): A minimalist cover with an integrated twist-lock. Align it with the clamp, push, and rotate to lock it in. No tools required to swap the shroud once the clamp is installed.

Hardware Needed

• 1x M3x10mm Screw (Standard M3) or longer

• 1x M3 Nut

Print Settings

• Material: PLA (Works great with standard prusa profiles)

• Supports: None needed for the clamp.

• Safety: Use with LED bulbs only to ensure the plastic stays cool. (or use hardier filaments)

Remix it

The twist-fit connection is designed to be a universal base. If you want a different look, feel free to remix the shroud while keeping the female attachment points.