Filament Refill Holder for BIQU Panda Station

Filament Refill Holder for the BIQU Panda Station

UPDATE 19 MAY 2026 : The distance between the screw holes on my cabinets is 80mm, but someone had a version where the distance was 70mm so I have added a version that can fit Variable distances between 55mm and 80mm.

Recently got a couple of Panda Stations from BIQU and printed their filament holders for the drawers in the cabinet, which are fine for the filament on spools, but I wanted to hide away the refill filament too and they wouldn't fit on their holders. (I know I could have left them in their boxes).
 

I designed this simple holder that you can screw into the slide out cabinet drawers using a couple of M3 x 10mm screws. ( you could use longer or maybe 8mm would work too.)

 There are two versions :-

1. Plain which uses approx 47g of filament and takes 1h 3m to print.

2. Cut Out which uses less filament at approx 36g and takes an extra 5minutes to print.

    

I used 3 walls and 10% rectilinear infill - No Supports required. I printed in PLA but PETG may be better, I'll see how they last.