Garden stake to custom trellis conversion kit

Added: 45 and 60 degree clip ons. Useful for support where needed. 

Had a bunch of unused garden stakes and wanted to build some trellises out of them so I made these. You will probably need to scale up or down a bit. I recommend trying to print the clip on connector first because it's the smallest and if your scaling fits that you can just apply the same to the rest.

Things can get pretty snug and you might get away with not needing screws in some areas but if you use the wedge maker i recommend at least securing the bridge between the two pieces with screws. 

• All insert depths ~25.5mm / Screw holes 4mm

• 3 different angles/widths when using the wedge maker

• Modeled to fit ~12mm diameter stakes - scale to your needs

• Print in whatever material suits your application best

• Material thickness is 3mm where the holes are for screws, just an fyi if you are screw shopping. Don't over tighten!

Includes

• Wedge maker (print 2x)

• Clip on

• T 3 way

• XYZ 3 way

• 90 degree

• Straight connector

• 4 way connector

• 45 Degree clip on 

• 65 Degree clip on