Combination Prusa Mk3 / Wanhao Y Carriage for Mk52 Heatbed

This is a DXF file that can be used to create (either by milling, cutting, or by using hand tools) a y-carriage compatible with the Prusa Mk3 Mk52 Heated Bed. This carriage will work on the Mk3, as well as the Wanhao Duplicator i3 and i3 Plus. It will also probably work on most other i3 type printers, as long as the spacing between the y-rods is 140-150mm or 170mm.

Now updated to fix the hole sizes for the bed screws. They should be drilled to 2.5mm, then tapped to 3mm.

I made this because I bought a clone of the prusa Mk52 heated bed, and discovered that it does not fit on the standard hole pattern for the y carriage.

This item will stay as a work in progress until I'm able to actually make a physical version and confirm it works, but everything should line up fine.

If someone out there either makes this or is willing to help me make it, let me know.

Category: 3D Printer Parts