Vertical Bokken Stand — 4-Part Print, No Hardware | STEP File Included

A clean, stable vertical stand for displaying your bokken. Designed from scratch because nothing available fit the bill — this one does.

Prints in 4 parts that assemble easily with no hardware. Gluing is optional but recommended for permanent display. Stable enough to hold a full-weight bokken without tipping.

What fits: Hook opening is 26mm tall with a 26mm diameter circle (R13). Fits standard bokken tsuba. Does not fit a sheathed katana — check the included technical drawing before purchasing.

Included files:

• 4x print-ready STL parts

• STEP file for modifications

• Technical drawing of hook and base plate for fit verification

Print Settings:

• Material: PLA (PETG recommended for added strength)

• Walls: 3

• Infill: 20% Cubic

• Supports: No

• Layer height: 0.2mm

Assembly notes: Parts press-fit together. Glue for permanent use. Rubber feet on the base are strongly recommended — not included but any standard adhesive feet work.