Lord Other's TOMY TMP Refit Enterprise LED spotlight collimators

These files are intended for use with the TOMY TMP Refit Enterprise diecast collectible. They are non-permanent additions that can be removed or replaced as needed, at any time. As such these additions are non-invasive and do not constitute any kind of alteration of the collectible, and so will not affect the warranty. They are free for you to use as you see fit for your own personal enjoyment. Since the originally sourced files I utilized to cobble these together in Meshmixer allow for remixing or alteration of the 3MF or STL files, the same holds true here. Please honour the Creative Commons 4.0 International License (Attribution—Noncommercial—Share Alike) as provided and do not resell these for commercial purposes. If you like my work, give me follow, and I'll see you around the galaxy!

The bow spotlight utilizes the 10⁰ file, and requires the purchase of the following item, or something of similar dimensions:
LED Lens 10 Degree IR Focus Reflector Collimator 14.5mm Lenses with Black White Holder For 1W 3W 5W High Power COB Lamp Light

The starboard and port secondary hull spotlights utilize the 15⁰ file, and also requires the purchase of the following item, or again, something of similar dimensions to create the desired effect:
High Power 1W 3W 5W LED Lens 20MM PMMA Lenses With Bracket Reflector10 30 45 60 90 120degree Reflector Collimator Convex Optical

Printing wise I suggest keeping the layers to .12mm layer height, and I used a Wall Printing Order of Inner/Outer/Inner, with the Wall Generator set to Arachne. Infill I set to 100%, and the 10⁰ file will need supports with the orientation provided. Elegoo PLA Pro Black is the filament I used, but any black PLA is probably just fine. The resulting prints are what you see in the photos.