File Snapper-Dapper

I don't know what these things are called, and neither do you, so... it's called a "File Snapper-Dapper", until (or possibly even if) I find out what they are actually called.

So you know those transparent envelope holder things with holes punched in the edges for filing that you can put papers in? And then you know how some of the files that you can put them in have those two bendy things you put through the holes, and then you need to snap them down somehow to keep them neat?

This thing is that thing that you can use to do that.

Look at the pictures, you'll understand that this is what you need if you know that you need this thing, and if you don't need this thing you won't know what I am talking about, and in that case this thing is probably not a thing that you need, and you can go on with your day and look at other things that you might (or might not) need.

Check the pictures for how to use it, but basically you push the "wires" through the holes in the base, bend them down, and then slide the top in to pin them down and close it up.

I printed in PLA with 0.2mm layers and 3 walls. It's not under a great deal of stress, and they seem to hold up well. If the sliders are a bit stiff, just slide them back and forth a bit.