Hairdryer Radiator Mount — With Diffuser Slot | Hardware Required

Keep your hairdryer stored in a convenient, accessible spot by mounting it directly onto a radiator pipe. Frees up counter and drawer space without drilling holes in your wall. Includes a slot for a diffuser attachment.

Compatibility:

• Radiator pipe: Ø31mm, 40.5mm mounting height, 31mm width

• Mounting plate clearance: 23mm wide, 26.5mm tall

• Hairdryer hook: 65mm diameter at top, 55mm at bottom

Hardware Required:

• 4x M3 screws, 12-25mm length

• 4x M3 hexagonal nuts (ISO 7380)

Nuts are strongly recommended — heavier hairdryers will pull screws out over time without them.

Print Settings:

• Material: Heat resistant filament strongly recommended (PETG minimum, ASA preferred). PLA works but may deform near a hot radiator over time

• Walls: 3

• Infill: 20%

• Supports: Yes

Notes: Technical drawings included for fit verification before printing.