Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 1

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 2

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 3

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 4

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 5

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 6

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 7

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 8

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 9

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Image 10

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Thumbnail 1

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Thumbnail 2

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Thumbnail 3

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Thumbnail 4

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Thumbnail 5

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Thumbnail 6

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Thumbnail 7

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack 3D Printer File Thumbnail 8

Honeycomb Micro-Mesh 2-Inch x 2-Inch Sanding Pad Rack

TheMakersWorkbench

April 14, 2022

Description Comments Tags

Description

I turn a lot of pens and use Micro-Mesh sanding pads to polish them when finished. I wanted a nice rack to hold the pads, and I think I went a little overboard with my design. This rack is fully skeletonized with a honeycomb pattern to aid in airflow to dry the pads out after use.

The rack holds 9 sanding pads sized 2-inches by 2-inches square, and fits the Micro-Mesh brand polishing/sanding pads.

For best results, print the rack laying on its back, and then print the pad trays flat on their bottom. I separated the trays from the rack to aid in a better quality print, and to negate the need for support. Use a small dab of CA glue to adhere the trays to the rack for a permanent assembly.

This rack is designed and tested to fit the Micro-Mesh sanding pads linked below:

Micro MESH Soft Touch Sanding Pads - https://amzn.to/3vba6CE

To aid in remixes from the community I have added the design files in all of the relevant formats for you to download.

Design File Included: .stl .f3d, step, .skp and obj files.

*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.

Follow The Makers Workbench on:

I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.4.1 with the following amendments made.

Print Settings