Prusament Spool Wind Chime

Prusament Spool Wind Chime:

I thought it would be cool to make a Prusament Spool Wind Chime. It works really well for both contests. I used the Prusa Dummy Spool to make this model. I plan on doing some testing on the tubes to hear the sounds they produce. 

The hardware used is 6 M3x12 Fasteners and 6 M3 Hex Nuts for the Mount. String to hang the tubes about 1.5" below the spool or alternating heights. Tie the knots so that they end up inside the tubes so they are not visible. String for the Striker and the Pendant that attaches to the bottom of the Hook, about 12" plus some extra for the knots. Tie knots to hold the Striker in place

Share a picture if you print one!