10inch Rackmount HDD and PSU Case

This model was inspired by Shaztech's "12 Trays HHD Enclosure, 3U Rack Mountable" however, almost everything was redesigned in order to fit my needs.

This model can fit 4 3.5in HDDs, 1 SFX PSU, and a 16mm power button. I recommend printing the backplate as well which supports a 120mm fan for cooling the HDDs. You will also need 4 HDD Female to Male Adapters, and a PSU Power Extension Cable, you can find these pretty easily on Amazon.

Power Cable: https://a.co/d/000j37sK

HDD Female to Male Adapters: https://a.co/d/02ZO7Dqo

Bill of Materials:

HDD & PSU Case:

1x HDD&PDU Body

1x PSU Backplate

1x PSU Frontplate

1x PSU Top Plate

2x 3U Rack ear

4x Drive Sled

4x Drive Sled Handle

4x HDD Adapter Mount

4x HDD Female to Male Adapters

22x 3Mx8 screws

16x 3Mx12 screws

12x 3M nuts

18x 3M Square nuts

Backplate:

2x Rack Ear Rear

2x Back Panel Bracket

1x 3U PSU Backplate

1x 120mm Fan

14x 3Mx8 Screws

2x 3Mx12 Screws (For Power Cable)

6x 3M nuts

8x 3M Square nuts

2x 3M lock nuts (For Power Cable)