Minimalist Keychain Organizer v.3.1

I printed with Overture PLA.

Print Settings

.10mm Detail

Bottom/Top with infill displayed

Top/bottom layers: 0 

Infill 25% (I thought honeycomb looked best)

Perimeters: 5 

Layer height: .10

Supports: off

Bottom/Top without displayed infill

System defaults should be fine, may increase infill to 20% for rigidity. 

Standoff

Infill: 100%

Hardware needed

1.  1x M3 low profile heat set insert.
2.  1x M2 low profile heat set insert.
3.  2x M2x4mm pan head screws.
4.  1x M2x10mm pan head screw.
5.  1x M3x10mm pan head screw.
6.  1x M3 washer.

***Hardware listed is for the current design which housed 2 keys. Increasing keys will increase screw lengths. 

Future edits will include sizes for more keys!

Upcoming edits:

1. Lengthen and increase key ring cutout to accommodate larger rings.
2. Multiple sizes for 2+ key configurations.