Literary Hero Bookmarks — 15 Silhouettes (16×70mm)

Fifteen flat-print bookmarks, one per literary hero. Each bookmark is

a single piece: a 16 × 70 mm flat strip (slim enough to slip between

book pages without bulging the spine) with a character silhouette

topper, joined by a narrow waist that's pierced by a Ø3 mm hole for

a tassel or ribbon.

The 15 characters:

• sherlock.stl— Sherlock Holmes (deerstalker + pipe)

• - dracula.stl— Dracula in flowing cape

• - gandalf.stl— Gandalf with hat and staff

• - smaug.stl— Smaug, dragon with wings spread

• - frodo.stl— Frodo Baggins

• - hook.stl— Captain Hook

• - raven.stl— The Raven (Edgar Allan Poe)

• - cheshire.stl— Cheshire Cat

• - alice.stl— Alice in Wonderland

• - white_rabbit.stl— The White Rabbit

• - hamlet.stl— Hamlet (with skull)

• - robin_hood.stl— Robin Hood with bow

• - long_john_silver.stl— Long John Silver, peg leg

• - mad_hatter.stl— The Mad Hatter

• - phoenix.stl— Phoenix rising

Dimensions:

• Strip: 16 × 70 × 1.2 mm — fits between book pages without pushing

•   the spine open. 1.6 mm tested too thick; 1.0 mm flexed too much.

• - Silhouette topper: scaled to fit a 32 × 42 mm bbox (varies per

•   character). Joined to the strip by a 8 × 6 mm waist with a Ø3 mm

•   hole for a tassel or ribbon — the "two parts with a hole between"

•   look reads as a real bookmark.

• - Total height ≈ 110-120 mm depending on silhouette.

Print any single character or all 15 as a matched literary set.

Prints flat, no supports, single color. Six layers at 0.2 mm gives

a robust strip without curl.

Optional: thread a tassel through the waist hole to mimic the

ribbon hanger on commercial paper bookmarks.