Bottle Opener Jig for UV printing [for Ultim8 Jig]

While Wham Bam Systems already provides a jig for these very common giveaway bottle openers on their support page, I did not like that it wasted space for the metal ring. 

My design allows the ring to be tucked under the opener, so you can nest the jigs a lot closer together. You can easily get 20 openers on the small bed this way. More if you are adventurous ;-).

I also did not include supports, because your slicer should be perfectly capable to generate them itself. Plus you can adjust them to what works best for your printer and material.

There is two variants: 

1. a single opener

2. a grid of 2 x 5 openers.

The grid variant allows for easier swapping of a full set of 10 openers in case you are doing serious batch work and want to pre-fill a set and just replace the whole jig.

Printing

Print with your favorite material and settings. I'd suggest a layer height of 0.2 mm.

Support is needed on the build plate because of the jig's legs.

License remark

Me using a "non-commercial" license does not prohibit you from using these commercially to print on bottle openers. But please do not sell the jig or the file itself.