Crevice nozzle for QikCln 45Kpa cordless stick vacuum

We lost the crevice attachment for our QikCln 45Kpa cordless stick vacuum. I decided to design and print one as a replacement.

This relies on a friction fit rather than the spring button on the original. It is possible that you may need to tune things for the fit to work using your filament and printer combination. an array of vent holes is added to the end of the nozzle, similar to the original, to allow airflow in the event the tip of the tool is obstructed.

PLA should be more than adequate, but nearly any filament should work.

Using the standard 2 perimeters, this is a solid print.