MP Select Mini Side Panel with 30 mm Cooling Fan and Bed Wires

MP Select Mini Side Panel

This side panel for the Monoprice Select Mini/Malyan M200 provides ventilation for the mainboard and allows you to mount a 30 mm cooling fan and reroute the bed wires out the side. I put a 40 mm fan on the hotend so I used the original 30 mm fan from the hotend for this side panel. The cutout for the fan is the Aperture Science logo from Portal.

The fan is attached with #4-40x0.75 in screws and nuts and I placed a dust filter inside between the fan and side panel. I didn't find a 30 mm dust filter, so cut down a larger dust filter with scissors and an X-ACTO knife.

The rubber grommet on the hole for the bed wires is from the bed where the wires used to go through before I moved them.

Links

• Screws: #4-40x0.75 in screws and nuts
• Dust Filter: Fan Dust Filter Mesh
• Tinkercad: MPSM Side Panel Right

Remixed from:

• Malyan M200 / MP select mini side cooling 60mm/50mm fan
• Monoprice Select Mini 30 mm Fan Guards

Category: 3D Printer Accessories