Maki roller

Summary
A single-print maki roller that saves your evening when you forgot to bring with you !
This has the same function as the ones made out of string and wood sticks available everywhere, but it obviously has the advantage of being printable.
This is just a series of rods joined by flat links intended to be only a few layers thick to allow flexibility.
Cover it with plastic food wrap to make it food safe.

Printing notes and advice
I printed it at @ 70% size if I recall correctly.
To make it ready to use right after the print, do not use brims.
If necessary, to adjust the thickness of the flexible layer, don't forget that you can just
use negative Z / cut the model depending on the slicer.
To make the first layer stick well enough on my glass bed, I have a very low jerk/acceleration profile for the first layer, and use a high first layer thickness modifier in cura, in order to get 0.6mm or more from my 0.4 nozzle.