Unifi UTR Thermal Spacer Plate (v3.1 UGreen Nexode Edition)

This is v3.1 of the model, the UGreen Nexode Batterybank Edition.
Superior ventilation ability but supports are required.

• Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up

• Ventilated underside design promotes air circulation (improved over v1)

• Helps maintain lower operating temperatures during sustained use

• Designed for use between travel routers & the UGreen PB763 or PB761 Powerbank, profiled retainers to keep the UTR & UGreen Powerbank in position relative to one another

• Lightweight, low-profile form factor adds cooling without bulk

• Precision-fit footprint for stable placement and reduced wobble

• Ideal for portable setups, travel rigs, and always-on devices

• Optimized for 3D printing with common materials (PLA, PETG, etc.)

• Simple, durable design with no assembly required, supports required are required!

Powerbank in photos is UGREEN Nexode Qi2 10,000mah, PB763 is the model number.

v3.1 (this model), v3 & v2: The temperature readings I get on the UTR is 40.2°C on the screen. 41.1°C hottest spot on top, and 42.6°C max on the bottom when using the model.

v1: The temperature readings I get on the UTR is 42°C on the screen. 42.4°C hottest spot on top, and 45.6°C max on the bottom when using the model.

PETG would be ideal as temperatures are too close to 50-60°C for PLA usage, but still possible.

Need the regular model for other powerbanks, batterypacks or other smooth surfaces? Check out v3 of this model here: