Small table lamp with lattice shade and low poly base

A minimal table lamp pairing a textured cylindrical shade with a chunky low-poly base. The diamond lattice pattern gives off a clear diagonal lighting effect, contrasting well with the sharp, faceted geometry of the stand. It’s a straightforward print that adds nice tactile details to a desk, inspired by contemporary geometric and modern Scandinavian style.

Get a commercial license to sell physical prints and access premium lamp files on my Patreon. If you enjoy my free designs and want to support my work so I can create more, you can do that there as well.

PRINTING & ASSEMBLY
• Print-ready and tested.
• Support-free design.
• Fits standard E26/E27 sockets (hole diameter 41 mm; can be used as a replacement shade for most home table or pendant lamps) and standard E14 socket with adapter (included in files; hole diameter: 28 mm).
• Supports printing with PLA, PETG and other standard plastics.
• Assembles easily without glue or screws.

MODULAR SYSTEM
Mix and match filament colors or pair this model with other interchangeable bases and shades from my profile (https://www.printables.com/@ZNOVOOdesign_4675060). Follow my page so you don't miss regular modular design updates.

DIMENSIONS
• Shade: height: 150 mm (5.9 in), width: 150 mm (5.9 in)
• Base: height: 75 mm (3 in), width: 100 mm (3.9 in)

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~2h 10m
• Base: ~2h 45m

WEIGHT
Depends on printing settings. Using the recommended settings: shade ~65 g, base ~90 g.

PRINT SETTINGS (recommended):
• Shade: VASE MODE (spiralize outer contour), layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 6.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin. (Warning! Do not apply fuzzy skin to the threaded parts of the base. You can also print the entire base without fuzzy skin).
• No supports needed.
• All STL, 3MF files are already oriented properly (base should be printed upside-down).

WHAT'S INCLUDED
Files for Lamp Shade and Base:
• STL — 3 files (Shade + Base + E14 adapter), print-ready (tested and verified on Ender 3 S1)
• OBJ — full lamp assembly (shade + base combined), for import into Blender, Cinema 4D, or any 3D software
• 3MF — 3 files (Shade + Base + E14 adapter), pre-configured print settings for Bambu Lab A1 (sliced in Bambu Studio — just open and print).

Use LED bulb ONLY.
A lamp cord with E26/E27 or E14 socket is required (not included). Search "plug in lamp cord kit E26" or "plug in lamp cord kit E14" on Amazon or your local hardware/lighting store.

•• For personal use ONLY. Resale of files or printed objects is not permitted.••

Visit my profile & follow for more designs — new models added regularly!