Prusa Core One + Temperature & Humidity Monitor Stand

Core One/+ Temp and humidity gauge stand.

Most Ive seen for the core one are sitting where you need light or get real close to read it so using two models I made a solution that is easy to view. The Thermometer / Hygrometer Stand by Extrutim as the base and the Hygrometer house for Prusa Core One by Raymond as the frame, I added 3, 3x12 N52 Magnets. The monitor now sits at the base of the core one and catches the core one light. I can now see the numbers at a glance.

The meter I used was on Amazon. Be cautious because they all show about the same dimensions but they aren't. https://a.co/d/0aWDqReW

I used organic supports and prusament petg. Use whatever supports that work the best for you. 

The magnets fit tight but you might have to use a dab of glue if you use strong magnets. 3 magnets is really overkill because it sits on the base and only needs to stay in place due to the machine vibration.