January 14, 2020
Description
The print takes 7.5 hours and around 125 grams of PLA
Works OK-ish for cracking walnuts size 35mm and for almonds.
I printed it in PLA but has some flex to it. If you print it from something else please tell me how it went.
You will need to sand the axle a little bit because it is too snug.
You can add spring: the pockets are for 4.5mm (I took one from automatic pen)
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2mm layers
Infill: 15-25%
Notes:
Print with 4-6 perimeters with 0.4mm nozzle and 15-25%infill
Use support
License:
Creative Commons — Attribution
eKacarski
