Stand for Smartphone

Smartphone stand. The angle of view is 45°.

The photos show the use with a Samsung Galaxy S10+.
When the Smartphone is in landscape position on the stand, the two front
cameras of the S10+ are covered. This covered part of the 3D-Print will also prevent the Smartphone of falling from the stand.

I used PLA for the print:

• Prusament PLA Azure Blue
• Prusament PLA Jet Black

Notes:

• Color change at the first layer and the last layer. (MMU2S not necessary)
• Print Time: 3h50min. (with 0,3 mm layer height)
• Dimensions of the stand (approx.): 120 mm x 100 mm x 60 mm