Armrests for ODDESUND outdoor furniture

Replacement armrest for ODDESUND outdoor furniture by Jutlandia. The armrests are ~65cm long, so they typically does not fit in small ordinary printers, that is why i have created two versions:

• Armrest full length, file:

  • Armlene - full.3mf

• Armrest splitted in three files:

  • Bakdel.3mf

  • Midtdel.3mf

  • Frontdel.3mf

  • Plugg.3mf (You will need 4 of these for one armrest)

Print instructions

Armrest

• Perimeters: 4

• Layer height: 0.20mm

• Top layer: 1mm

• Bottom layer: 0.8mm

• Infill: 25% Gyroid

• Filament: PETG (Or other weather proof)

• Brim: Recommended

The plug connectors

• Infill: 100%

• Filament: PETG

• Orientation: Laying down recommended

• Brim: Recommended

Glue the pieces together.

Recommended to drill a hole for the screws before you insert the screws to prevent the armrest from cracking.