UFO abducting cow wind chime

Just UFO abducting cow dangling in the wind

Printing:

No supports, you can print UFO with smaller layer height or adaptive for better result.

You can do colour change on cow(after 2.5 mm), print second one mirrored and glue them together so details are visible from both sides.

Print tubes(cylinders) upsidedown(with top on the build plate)

Assembly:

Take a string, run it from the top of the beam, make knot to secure beam on the rope from inside, same for the ball, just make sure it stays inside the beam. Then attach string to the UFO and cow last. 

Optional glue on the windows 

If you want, you can add cylinders around the beam, I just like plain ufo with beam only. Best is to hang UFO with beam and then attach the cylinders so they end up at same distance from the bottom of the beam.

--------------------

Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)