April 15, 2022
Description
Allows you to run a larger Y stepper motor without it interfering with the Y carriage. This is for ender 3 v2's inside of an enclosure after the PSU has been moved outside of the enclosure.
Requires some long M5 bolts, longer than stock M3 bolt for mounting stock Y axis endstop housing, and some GT2 idler pulleys (one toothed one smooth would be ideal, I used two smooth).
Recommend ABS.
Good luck getting the top two mounting bolts in. I didn't use them.
License:
Creative Commons — Public Domain
7
RENOxDECEPTION
