Hinge for Olsen and Smith 830L outdoor storage unit

The hinges on the Olsen and Smith 803L outdoor store box seem rather easy to damage so I made this model for a replacement.

Since this is for outdoor use I'd recommend the use of ASA filment and as some strength is needed I'd advise a wall thickness of at least 2mm, use alternating additional walls, 25% infill. I printed in an un-reinforced ASA and it worked fine but ASA-CF or ASA-GF would likely be even better. Print at a layer height of 0.15mm or less and use tree support to make sure the hinge pins come out OK.