Cute Fridge Magnet Set – 6 Simple Shapes, No Supports

Before you move on to the description, please read this note: we use AI support only where it speeds up work that we would otherwise do ourselves — the idea, design decisions, refinement, and final result remain our own work. We mention this for those for whom it matters. Have fun and happy printing!

A small and colorful set of 6 printable fridge magnets designed for fridges, magnetic boards, lockers, or any metal surface.

The set includes:

Star, Cloud, Hexagon, Flower, Moon, Heart

Each model has a simple, clean shape and looks great in different filament colors — pastel, silk, matte, bright PLA, or any color combination you like. They are perfect for decorating your fridge, holding notes, displaying photos, organizing a magnetic board, or making a small personalized gift.

Each magnet has two holes on the bottom side, designed for 6 × 2 mm round magnets. The holes are made for a tight press-fit, so the magnets should stay in place without glue.

For decoration only, one magnet is usually enough. If you want the model to hold photos, notes, or documents, using two magnets is recommended for stronger grip.

Please note that the final fit may depend on your filament type, printer calibration, flow, and material shrinkage. My test prints made with SUNLU PLA and Anycubic PLA fit the 6 × 2 mm magnets perfectly.

Recommended settings:

Material: PLA / PLA+
Layer height: 0.16–0.20 mm
Infill: 10–20%
Walls: 2–3
Supports: Not required
Brim: Optional, only if needed for bed adhesion
Magnet size: 6 × 2 mm round magnets
Assembly: Press-fit magnets into the bottom holes

For the best magnet fit, make sure your printer is well calibrated. If the holes are too tight or too loose, slightly adjust horizontal expansion or scale only if needed.