Spinning Silly Umbrella for Happy Days

Model consists of eight top segments, one center segment, and one stand. There are two options for the stand provided - a standalone one and one as a corner plug for the CoreOne. 

Print the top segments in various colors, then push them into the slit of the center segment. It is a tight fit, glue is not needed. Install a 608 bearing inside the center segment and then place it on top of the chosen stand.

For the corner plug I reused / remixed an existing model as an easy way to install the umbrella on the printer (it is an optional part of my model so I did not flag it as an official remix). Originally I planned to use magnets but I did not have magnets strong enough: 

Bill of Materials

• One 608 Bearing

The orange umbrella is printed in Prusament Orange and Galaxy Black PLA, the gay one is printed in various Polyterra PLAs.

Recommended print orientation and usage of supports is shown on attached picture.

Note: There is no propulsion - you have to spin the umbrella manually. It would be cool to redirect the printer's exhaust to make it spin automatically though!

Happy printing!