Magnetic sign for Prusa Core One printers

Magnetic sign for Prusa Core One printers

Add the text you want to show on the sign with the Prusa Slicer text function.

Add 3 magnets in Ø10x3mm to the back of the part after printing.

Printing instructions:

• 0.2 speed profile.

• No support needed.

• Textured sheet usage could add a nice texture to the parts.

  • If you use a textured sheet, let it cool down completely after the print and wait for the part gets loose by itself. Do not pull on it to avoid ripping off the letters! 

  • In my case it takes 20-30 minutes after the print has ended and the part just lays loose on the print bed.

  • Do not touch the print bed and clean it with Isopropanol alcohol before printing.

• Adding the custom text: 

  • Two (2) color changes in the lid part are required at about 1mm and 2.4mm height to create the color change for the text. To read how such a color change is done, you will find a really good article here.

  • I have added you a sign with no text for Prusa Slicer ≥2.8 where you simply can modify the text, font and size. The mode should be “cutout” to cut the text in the lid. You can read more about the text tool in Prusa Slicer here. 

Happy printing =)