April 16, 2022
Description
Needed a Hanger for my ladder to get it out of the way.
Two versions.
One without and one with slight campfer on one side so that you can push in the ladder at an angle more easy.
Made for roof or 45mm beam (2" for you imperial savages ;))
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Any Any Black
Notes:
This was made with a AM8 BLV at 70mm/s and with normal PLA (will se by time if it will hold)
License:
Creative Commons — Attribution
Diio
