The Holy PASTAfarian Windchime (Flying Spaghetti Monster Edition)

Are you a proud Pastafarian or just a massive Pasta lover? Bring some humor and good vibes to your garden, balcony, or kitchen with The Holy Pastafarian Windchime!

This unique design features a classic colander (strainer) as the top base, various popular pasta shapes ( Rigatoni, Cellentani, Tortiglioni, Penne Rigate and Ravioli) as the chimes, and the glorious Flying Spaghetti Monster (FSM) acting as the wind sail at the bottom.

Features:

• Fully Customizable: Every piece features a 3mm attachment hole. This allows you to vary the exact position, hanging length, and number of pasta pieces to create your own unique arrangement.

• Easy Assembly: Just use a simple thread, nylon string, or fishing line to tie the pieces to the colander base.

Print Settings:

• Nozzle Diameter: 0.4 mm

• Layer Height: 0.2 mm

• Infill: 15% - 20% (Gyroid or Grid)

• Supports: Should print well without, if placed like in screenshot. 

• Material Recommendations:

  • Indoor use: PLA or PETG in your favorite pasta colors.

  • Outdoor use: ASA (or high-quality PETG) is highly recommended for superior UV and weather resistance so your pasta doesn't fade in the sun.

Assembly Instructions:

1. Print the colander top, the FSM wind sail, and as many pasta pieces as you like.

2. Cut pieces of string/fishing line to your desired lengths.

3. Thread the lines through the 3mm holes to attach the pasta shapes to the colander.

4. Hang the Flying Spaghetti Monster from the center bottom so it can easily catch the breeze and make the pasta chimes dance.

May you be touched by His Noodly Appendage.