AA + AAA Battery Dispenser (MultiBuild)

If you just want to attach it directly to a wall, use these attachment points.
Use as many as you want, minimum 2. Space them out at any interval of 25mm.

This battery dispenser features an S-shaped magazine to reduce jamming risk. Batteries are dispensed by removing them from either side, to make corner mounting possible and prevent accidental release. The internals never overhang more than 45 degrees, so it requires no supports when printing in the provided orientation. 

Attaches to a (lite) fix point on a Multiboard. The total installation with necessary clearance will consume 100mm (4 CU) by 250mm (10 CU).




The fix point rails are a design element created by Keep Making. The MultiBuild license applies to that feature. If you wish to remix this design and not be bound by the MultiBuild license, remove the attachment slot entirely.
https://www.multiboard.io/license