Textured Table Lamp On Legs, Easy Print Modern DIY Lighting

This 3D printed minimalist table lamp pairs a cylindrical shade with a subtly woven, quilted textured surface that creates a diamond-like effect and gives a soft, patterned glow. The simple base on four legs keeps the silhouette light and airy while giving the lamp a small sculptural presence on a desk or side table. The design balances clean geometry with subtle surface detail, making it a straightforward 3D print for everyday use in modern interiors, inspired by mid-century and contemporary Scandinavian style.

Get a commercial license to sell physical prints and access premium lamp files on my Patreon. If you enjoy my free designs and want to support my work so I can create more, you can do that there as well.

PRINTING & ASSEMBLY
• Print-ready and tested.
• Support-free design.
• Fits standard E26/E27 sockets (hole diameter 41 mm; can be used as a replacement shade for most home table or pendant lamps) and standard E14 socket with adapter (included in files; hole diameter: 28 mm).
• Supports printing with PLA, PETG and other standard filaments.
• Assembles easily without glue or screws.

MODULAR SYSTEM
Mix and match filament colors, or pair this model with other interchangeable bases and shades from the AIR or UNI series available in my profile. AIR shades fit AIR bases directly, and they also fit UNI bases or  most home lamps using the included adapter (UNI shades do not fit AIR bases). Follow my page for regular modular design updates. 

DIMENSIONS
• Shade: height: 142 mm (5.6 in), width: 168 mm (6.6 in)
• Base: height: 148 mm (5.8 in), width: 143 mm (5.6 in)

PRINT TIME
Depends on printer and print settings. For standard settings on a Bambu Lab A1:
• Shade: ~3h 40m
• Base: ~4h 50m

WEIGHT
Depends on printing settings. Using the recommended settings: shade ~100 g, base ~125 g.

PRINT SETTINGS (recommended):
• Shade: VASE MODE (spiralize outer contour), layer height 0.2 mm, layer width 0.6 mm (I use nozzle 0.4 mm with extrusion width 0.6 mm), top layers 0, bottom layers 20.
• Base: standard mode, layer height 0.2 mm, layer width 0.4 mm, infill 15% (you can use from 5% but the base will feel lighter and less solid), top layers 5, bottom layers 5, 2-3 outer walls (perimeters), fuzzy skin for Base. (Warning! Do not apply fuzzy skin to the threaded parts of the base. You can also print the entire base without fuzzy skin).
• No supports needed.
 • All STL, 3MF files are already oriented properly (base should be printed upside-down).

Use LED bulb ONLY.

A lamp cord with E26/E27 or E14 socket is required (not included) — available at most hardware or lighting stores (for example:
for the US https://amoz.onl/4yY, for Europe https://amoz.onl/4yW)

•• For personal use ONLY. Resale of files or printed objects is not permitted.••

Any questions? Feel free to ask!

Visit my profile & follow for more designs — new models added regularly!