Tomos A35 Intake manifold

Custom intake manifold for Tomos A35 moped / scooter. For use with stock (or similar) cylinders. I'm running an airsal cylinder, but I know it is the same as a stock one. It has an internal diameter of >= 14mm.

Carb position is exactly the same as the stock manifold. My manifold has a larger engine-side opening to allow the mixture to flow more freely through the membrane. Also has a nice cuve instead of the weird angles on the stock one.

Two versions: one with and one without oil plug. Standard M6 thread for a standard Dellorto Banjo bolt(? - the hollow bolt the oil flows through)

I printed mine using Sunlu ABS-like resin on an Elegoo Mars 4 Max. Has not been tested for long periods of time. I am not quite sure how you would print this on a standard FDM printer, because of the required supports. I also haven't tried it.