Halloween Wednesday Bookmark Set

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Wednesday Addams just screams out Halloween. Made one of her more traditional looking in front of a coffin and the other a little more scary with a possessed Thing. Both utilize a monochromatic palette, primarily black and white with shades of grey, emphasizing the dark and mysterious themes, reminiscent of Wednesday.

1. Coffin: This bookmark is shaped like a coffin having a normal looking Wednesday Addams, with braided pigtails and a dark dress. She stands within the coffin frame, surrounded by spiderwebs, bats and a raven perched on a tree branch. The lower portion has gnarled roots and skeletal hands reaching upwards, adding to the macabre aesthetic.

2. Demonic: An advisory is needed for this one. Print only if you are not afraid to be haunted by the image. This bookmark is more regularly shaped aside from the bat wings atop. Wednesday looks possessed and demonic, as her face is shaded in an ominous white. She is accompanied by a possessed Thing with an eye in the palm. A dead tree trunk, spiders, spider webs, pumpkins, and skulls surround her in added macabre details. 

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Jade White Transmission Distance: 4.3

This print uses 3 unique filaments 

Swap Instructions:

Start with Black

At layer (0.88mm) swap to Blue Gray

At layer (1.12mm) swap to Jade White for the rest. 

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.  

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections