Top tether hooks

This is a hook that can be connected to the top tether mount.  It fits well in my nx4 Hyundai tucson. 

There are 2 parts to the connector: a mount that clips on to the top tether rod and an accessory that holds whatever you want to secure and is connected to the mount. I've uploaded one for holding a med kit (this also require some 20mm velcro or other straps) and a hook for holding bags.

There are tho versions of the mount. The difference is that the center post in one is 9 mm and the other is 7. I used the longer one because I have seat covers that add a bit to the thickness.

I printed them in petg (will change to asa if petg doesn't behave) with the following settings:

• nozzle: 0.4

• layer height: 0.2

• wall loops: 5

• top/bottom layers: 3

• sparse infill: 30% gyroid

• supports: can be used but should also work without