Itachi Uchiha, Naruto, Framed Bookmark

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

This is a perfect representation of Itachi Uchiha from Naruto Shippuden with his signature red Sharingan eyes and somber demeanor. The red Akatsuki clouds motif attire as crows manifest themselves from him completes the look. This is a must have for Naruto fans.

 Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    PLA BambuLab Basic Maroon Red  Transmission Distance: 1.6
    PLA BambuLab Basic Beige Transmission Distance: 3.7
This print uses 4 unique filaments 

Swap Instructions:
    Start with Black
    At layer (0.96mm) swap to Blue Gray
    At layer (1.12mm) swap to Maroon Red
    At layer (1.36mm) swap to Beige for the rest. 

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections