45⁰ Elbow Fitting and Covers for PVC

This is a 45⁰ Hub X Spigot Street Elbow Fitting, I designed for installing a PVC Pipe in a 2x4 wall to hide the cables going to a wall mounted TV. They’re designed for the inside to be smooth throughout, even at the joints so the cables won’t catch on them. I also made end covers for them, both with and without a slot for the cables—could also be good for using for computer cable hole covers. Can customize both pipe fitting and cover upon request. 

Pipe Fitting:
Hub End: OD = 2.19" ID = 1.9"
Hub Depth: 0.4”
Spigot End: OD = 1.9" ID = 1.61"
Wall Thickness: 0.145”
Height: 2.2"

Cover:
Insert: OD = 1.61" ID = 1.32"
Insert Depth: 0.4”
Wall Thickness: 0.145”
Plate: OD = 2.9" Thickness = 0.0938”
Slot: 0.8" (0.148” offset below center)
Height: 0.4938"