Parametric HSW Hook

This is a parametric hook for the Honeycomb Storage Wall project. You can customize the hooks in FreeCAD.

What are the parameters?

• Hook Base Length

  • The shortest distance between the insert and the hook notch. Whatever you want to hang on the hook should be shorter than this!

• Hook Start Width

  • The hook starts this wide from the insert.

• Hook End Width

  • the hook notch's width at the end.

• Hook Tip Height

  • Measured from the top face of the hook.

• Hook Tip Width

The project is not foolproof. Setting incorrect values will break the geometry! I recommend changing the parameters in small chunks (+- 1 mm). If you encounter any errors, please let me know in the comments and i will try to help.

Happy Printing and Customizing!

Check out my Other HSW remixes here.