May 23, 2026
Description
A Hueforge of a JR E235 train set.
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm
The Model is 200x133.96mm in size
You may print at higher layer heights below the Base Thickness of 0.6mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.05738mm
#000000 PLA Creality Ender Black Transmission Distance: 0.2
#ffffff PLA Creality Ender White Transmission Distance: 8
#76b16d PLA Creality Hyper Green Transmission Distance: 2.3
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.7mm) swap to White
At layer #13 (1.4mm) swap to Green for the rest.
The description is also downloadable.
Source for the picture:
https://commons.wikimedia.org/wiki/File:JR_East_E235-0_Series_No.13_Ebisu_Sta.jpg
License:
Creative Commons — Attribution — Noncommercial
nicolahu
