May 24, 2026
Description
INCLUDED IS A TEST FILE ONLY, you can download all the files from here: https://cults3d.com/en/3d-model/game/vortex-a-high-speed-rc-pusher-jet
Meet, The Vortex!
It is lightly based off of the HobbyKing Radjet, and the Multiplex Funjet. But is 100% designed by me.
It's got a 750mm Wingspan, and runs off of a 2205 2300kv motor, with a 6x4.5 prop. (unless you're going for speed, in which case you should do some research)
I printed the wings in PolyMaker Grey LW-PLA, and the fuselage in normal Esun PLA. If you're going to use normal PLA, you'll need .4mm walls, with 3% cubic infill. If using LW-PLA, you'll want to use .6 -.8mm walls with 4-5% cubic infill. *PRINT THE FIREWALL AND CANOPY THICKER, with about 20% infill and .8mm walls. The parts will fit on a standard Ender 3.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
Mr Man
