May 24, 2026
Description
These are designed specifically for the Xiao ESP32-C5 boards from Seeed Studio and SMA connectors. They may be comparable with C3 boards; however, I don't have access too one to try a test-fit. If you're well versed in the ways of soldering and GPIOs (I'm not) the two boards can share power from a single USB cable.
P.S. please excuse the horrendous print quality from my damp filament printed on an old Prusa Mini that's well due for an overhaul....
Xiao ESP-32 C5 board
2x M2x10mm bolts
Print with flat bottom/top faces towards the build plate.
Prints on a 0.4 and 0.6mm nozzle without any fitment issues.
3 walls, 20% infill, no supports requried!
An outer wall brim may be required if you have issues with bed adhesion.
Light deburring may be required!
You are welcome to remix and share as you see fit; however, any commercial use is strictly forbidden!
License:
Creative Commons — Attribution — Noncommercial — Share Alike