March 11, 2025
Description
Sometimes, the stock screw brakes up. Why buy a new one when you can print it ?
Note : if you use PLA, it's known to be fragile so you should not go over 0.2 mm of height and over 40 mms speed to let layers fusioning well. Or better use ABS / PETG.
Update 07/03/2024 : Redesigned object from scratch. It is stronger and now there are two sizes available.
| Recommended settings | \_/ Ø 0.4 | |
| Layer height | 0.1 | |
| Perimeters | 4 | |
| Infill | ||
| Bottom & Top | 6 | 6 |
| Supports |
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Zendama
